( Service ) — 3D scanning in Pune

3D Scanning Services in Pune

VShark Solutions Pvt Ltd provides 3D scanning services for Pune manufacturers, serving Pune from Coimbatore, Tamil Nadu. You send the part by courier and we scan it, or ask us about on-site options. You get an STL mesh, an editable STEP CAD model or an inspection report. Send a photo and a short description for a written quote.

Scan data of a car wheel shown on a laptop screen, the first step before a CAD model is built from a scan

Who this page is for in Pune

Your workTypical parts
If you make vehicle parts or fixturesBrackets, housings and assembly fixtures with no current drawing
If you run a tool roomWorn inserts and dies that need a CAD model before re-cutting
If you maintain machineryOut-of-production wear parts and castings

How a Pune job runs

  1. Photograph the part from three sides with a ruler beside it and send the photo with the output you need.
  2. We reply with the scanning method and a written quote.
  3. Courier the part, packed as described below, to Coimbatore.
  4. We scan it, rebuild the model or run the deviation check, and send the files by email.

Sending a part from Pune

Pack the part in a rigid box with foam, keep mating parts together, and send a photo before it moves. We confirm the route first.

On-site options in Pune

Ask us about on-site options for large dies or fixed machines at your Pune plant.

Portable CMM arm measuring a machined aluminium housing, used when a Pune part must be checked against a drawing
Portable CMM arm measuring a machined aluminium housing, used when a Pune part must be checked against a drawing

What you receive

For a Pune tool room the usual deliverable is an editable STEP model of the insert or fixture plus the mesh it came from. Deviation reports are normally delivered in 2 to 3 days.

Serving other cities too: 3D scanning services in Chennai, 3D scanning services in Hyderabad, 3D scanning services in Bengaluru, 3D scanning for the UAE.

Why VShark Solutions

  • Parts are scanned and modelled by the same team, so questions on a Pune job go to one person.
  • Distributor of JINUOSH Vertex 3D scanners in India.
  • Operating since December 2019 from Coimbatore, serving Pune from Coimbatore.
  • Office hours 9 AM to 7 PM.

Send a photo and a short description of your part for a quote or email info@vsharksolutions.com.

Last reviewed:

FAQ

Common questions.

Do you have an office in Pune?

No. We serve Pune from Coimbatore, Tamil Nadu. Parts come to us by courier, or ask us about on-site options.

How do I send a part from Pune for 3D scanning?

Send a photo, the approximate size and the output you need. We confirm the route, then you pack the part in a rigid box with its mating parts and courier it to Coimbatore.

Can you scan a die or machine at my Pune plant?

Ask us about on-site options. Send a photo of the part in place and its size, and we reply on whether a visit suits the job.

What do I get after the scan?

An STL or PLY mesh, an editable STEP, IGES or Parasolid model, or a PDF inspection report with a deviation colour map. Inspection reports are normally delivered in 2 to 3 days.

Can you rebuild a part that has no drawing?

Yes. We scan it, rebuild an editable CAD model and check the model against the scan. See the process in our spare part guide.

Do you also check parts against a drawing?

Yes. We offer portable CMM arm inspection and scan-based deviation reports.

What does it cost?

We quote per job in writing. The drivers are part size, surface, accuracy, output and location. There is no public price list.

Which scanners do you use?

We distribute JINUOSH Vertex handheld scanners in India and scan with the Vertex and Vertex Tracker.

Send us your part.

Send a photo and a short description of your part and we will quote the job in writing. We serve Coimbatore, Tamil Nadu, India and the UAE.

Request a quote WhatsApp us

India +91 95142 48525 · UAE +971 52 248 6238